|
| |
Product Description
500L Stainless Beer Conical Fermenter In Stock
500L beer conical fermenter Introduction:
500l beer conical fermenter are also called fermenters, CCT’s (Cylindrical Conical Tanks),FV’s (Fermentation Vessels), fermentation tanks, primary fermentor or unitanks as they are used both for fermenting and lagering.
Fermenting is the process during which the yeast transforms the wort into beer.
Lagerings takes place after fermenting and is the time given to the beer to stabilize and age after fermenting.
Brewman beer fermentation tanks can be individually temperature controlled through glycol jackets
and are mostly equipped with accessories such as pressure gauge and relief valves(PRVR), CIP cleaning arm,
Spunding valves, Carbonation stone, sanitary sample valve, manhole, Levels etc.
500l conical fermenter Shipping:
.Plastic film wrapped and iron frame fixing for FCL(full container loading)
20’GP, 20’HQ, 40’GP, 40’HQ,45’GP,45’HQ,
.Wooden case package for LCL(less container loading) and flat shipping
500L Fermenter Configuration:
Configuration | |
Pressure | Design pressure 45 psi (3bar) |
Working pressure 30psi (2bar) | |
Interior shell | 304 stainless steel, thickness 3mm |
Exterior shell | Fully welded,304 stainless steel, thickness 2mm |
Interior and exterior finish | Acid washing to 0.6um |
60 degree cone bottom, other angles can be specified during the design process | |
Beer rotating arm beer outlet, beer discharging port at the bottom | |
25% headspace, unless a different volume is requested | |
Side manway door | |
Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet | |
Polyurethane insulation thickness 80mm for cooling jacket on side and bottom | |
Non welding CIP arm and rotating 360 degree reach spray ball | |
Solenoid relief valve, pressure relief valve (saftyvalve) are standard | |
Pressure gauge | |
Temperature sensor well | |
Sanitary sample valve and port | |
All clamps and gaskets to attach all accessories | |
Tank complete with piping, fittings, sanitary valves and all parts. | |
4 stainless steel legs with leveling footpads | |
Tank Design | Carbonation port |
Spunding valve 0.2-2.2bar | |
Glass Level tube | |
